Sunday 30 August 2015

Winter Stole Update: Test Knit Completed ✔

Back in January I released my pattern notes for the Winter Stole, a lace stole knitted with a chunky alpaca / wool blend on 6mm needles. More background on the rationale behind the design and my choice of yarn is available here; and the pattern is available here.


The Winter Stole pattern was developed to encourage knitters (and myself) to diversify the choice of materials when knitting lace. Depending, of course, on the complexity of the lace stitch sequence and the overall design, I was aiming to showcase that it is possible to produce knitted lace with chunkier yarns. 

Winter Stole (yarn: Wendy Zena, pattern available here.


Winter Stole (yarn: Wendy Zena, pattern available here.

Thanks to Tara (tara53aus on Ravelry) I am now pleased to announce that the pattern has undergone its first 'independent' test knit and Tara's completed stole is pictured below:


Tara's Completed Winter Stole 

Regular readers of this blog will know that I am always thankful for the feedback I receive from the knitters of my designs, especially from those, who put their trust in a pattern that has so far only been completed by the pattern's very own designer. This was the case with the Winter Stole pattern. 


This time round and following the feedback I received from Tara, I am particularly pleased to announce that my original Winter Stole pattern is free of mistakes, slips and no modifications are necessary.


Tara's Stole Blocking

I was also delighted to see that Tara not only used a natural, undyed alpaca yarn to complete her stole, she also chose a very special handspun yarn from an independent producer in Western Australia. 


Sadly, I was not able to retrieve more information on the producer over the web, but the ball band details can be seen in the picture below. So, if you are located in Western Australia, I suggest you get your hands on a delightful skein (or two) of Greg's and Wendy's handspun.




A remark on the pattern from my side: I have decided to update the pattern notes of the Winter Stole slightly with optional variations, to take those knitters into consideration, who are opting to use handspun yarn (Alpaca or otherwise) and may thus only have a finite amount of yarn to complete the project. The stole was designed to be rather wide and fewer cast-on stitches (resulting in fewer lace motif repeats in the body of the piece) will ensure that the piece will turn out long enough to be classed a 'stole'. These notes on modifications of the original pattern will be published shortly. In the meantime, the original Winter Stole pattern is available here.

Finally and once again, a very big 'THANK YOU!' to Tara for her feedback, for being the first to test the pattern and for choosing a delicious, independently produced, handspun yarn to complete her project. 

For any interested knitters, wishing to complete a Winter Stole and requiring pattern support, please feel free to contact me via Ravelry (ClariceAsquith), Twitter (@Slipstitched), leave a comment below or by e-mail: clarice.asquith@googlemail.com.


For a link collection to all original designs on the blog, please visit this link.

Thursday 27 August 2015

Knitting with Non-Traditional Materials: The Nameless Choker meets the Nameless Cuff

Roughly one year ago I released project notes for a simple knitted lace choker, the Nameless Choker. The pattern notes for the 'Nameless Choker' are available here. 

Specifically designed to use up the last remnants of sock yarn after the completion of a larger project, Nameless is an ideal project for a very small quantity of yarn (approximately 10 - 20 grams).


Nameless Choker, Knitting Pattern available here


One year on, I decided to explore the choice of material for this project in more detail. Whilst certain types of sock and cotton yarn (especially the sturdier varieties) work very well with the design, the pattern provides an ideal starting point for venturing into new territory, i.e. the cross-over point where knitting and jewellery-making techniques meet and blend into one another. 

For my revision of the pattern, I am planning to adapt the original design with the help of a number of non-traditional materials such as waxed cotton thong cord (1mm), leather cord (1mm) and, potentially, jewellery wires.

Having completed an initial experiment with waxed cotton cord (shown below), it is clear that certain design elements  of the original pattern (stitch count, lace repeats, needle size and quantities etc.) will obviously have to be revised and modified to take the properties of cotton thread into consideration, but I am quite happy with the initial outcome.

The first insight derived from yesterday's cotton cord knitting session is that 10 metres of waxed cotton thong are not sufficient to produce a fully fledged knitted choker on the basis of the original Nameless pattern, but they will be enough to make a knitted wrist cuff.   

Nameless Cuff (knitted with 1mm waxed cotton cord)


Nameless Cuff (knitted with 1mm waxed cotton cord)


Nameless Cuff (knitted with 1mm waxed cotton cord)

Nameless Cuff Prototype

Nameless Cuff - Prototype

Further updates and finalised project notes on the Nameless Cuff and the modified Nameless Choker will be up on the blog shortly. 

In the meantime, stay tuned... 





Sunday 23 August 2015

Cartridge Rib Stitch in the Round + Cat = Cat Leg Warmer



Cartridge Rib Stitch in the Round + Cat = Cat Leg Warmer

The blog seems to have received a number of search queries for instructions to the cartridge rib stitch motif knitted in the round. This is potentially the result of an earlier entry, in which I posted the stitch sequence for the basic cartridge rib stitch. This is available here.


Catridge Rib Stitch Sample in the Round

Saturday 22 August 2015

Cast-on loosely and don't knit tight - knitting lace with fingering weight mohair yarn

Wisp: Pattern by Cheryl Niamath (published in Knitty, Summer 2007), Yarn: Patons UK Misty


The Wisp Shawl pattern by Cheryl Niamath has somewhat turned into a classic lace knitting pattern and due to its simplicity it tends to attract many beginner lace knitters, who may never have used cobweb or fingering weight yarn in any of their projects before.

Though not my first lace project, I, too, opted for the pattern as I wanted to gain experience knitting lace with fingering weight yarn, whilst completing a relatively simple pattern. Niamath's Wisp fulfils these requirements and due to its straightforward stitch sequence, it allows you to concentrate on your manual ability and, above all, to get a feel for working with extremely fine yarn. 


Thursday 20 August 2015

The Weekly Swatch: The Simple Cable Stitch / Rope Stitch

Simple Cable / Rope Stitch (Sample knitted with Rowan Cocoon)

It occurred to me that I have so far seriously neglected knitted cables on this blog, and as I am currently swatching for new designs (another snood / cowl due for release later this autumn), this week's swatch will feature a simple cable stitch, which is also often referred to as 'Rope Stitch'. 



Simple Cable / Rope Stitch (Sample knitted with Stylecraft Signature Chunky)