Showing posts with label Ammonite. Show all posts
Showing posts with label Ammonite. Show all posts

Saturday 27 June 2015

The Picot Bind-Off: It's a love-hate relationship

I'm in the process of finishing the Picot Pi and (as the name suggests) I'm binding off picot-style. At over one thousand stitches, this is a lengthy and repetitive process. But, the end result will be worth the wait.

Picot literally means 'small loop' and describes the bobbles at the cast-off edge, which are produced by adding more stitches immediately before binding off. Incorporating the picot bind-off will result in a very flexible, wider garment at the outer edge of the piece. In other words, it adds drape.

Picot Bind-Off Detail for Ammonite 

Sunday 14 June 2015

Design Digest: Revisiting the Ammonite Prototype

Following a few enquiries from the knittersphere regarding the prototype Ammonite in grey, which eventually evolved into the Ammonite pattern, I finally found the time to write up my recollections, which might help with the queries I recently received. 

Apologies for such a late response to all those who got in touch!

Ammonite Mark 2 Pattern instructions available here

Ammonite Mark 3, Project Notes are available here

Unfortunately, I didn't take any notes when knitting my freestyle Ammonite prototype. Below you will find some pointers, which might be useful, should you wish to achieve a different appearance from the final Ammonite pattern: 


Freestyle Ammonite


Sunday 21 September 2014

A Gallery of Ammonites

In a recent post on a new design, I briefly reflected on why I enjoy creating my own knitting patterns. It turns out that I secretly take pleasure in the hardship of the creative process: choosing yarns, counting stitches, knitting swatches, discarding those swatches and so on, until I arrive at combinations that can be turned into a viable design. 

Ammonite in Moonlight Sonata (James C Brett Yarns) 

Saturday 22 March 2014

There and Back Again....

Gallery of a Public Transport Knitter





Some Vital Statistics

Excluding the London Underground network, 2.5 million people commute to work by rail in the United Kingdom every day. More than a third of those commute to work to and from London. With a population of 13,614,409, the London commuter belt, which is also defined as the Southeast Metropolitan Area, is the largest in the European Union. The geographical boundaries of the Southeast Metropolitan Area are in constant flux. As the urban sprawl continues ever on and transport links are improved or created, it is expected to further expand.

My stretch of the line is operated by Southeastern. 70% of Southeastern's services transport passengers from Kent and parts of East Sussex to the major London termini. On their website Southeastern claim to be transporting 570,000 commuters to the capital every weekday morning. I happen to be one of them.




Sunday 24 March 2013

Still No German Translation for Ammonite ...or Ammonite in Moonlight Sonata (James C Brett)

I should be renaming this blog into the 'Absent Knitter's Landing Page'. In actual fact, I might just do that in a minute. Considering this rather long period of silence (due to having nothing to report on the knitting front as of late), I may take a while to find the 'knitting voice'...the nice, fluffy me. It's not here at the moment. I lost it on a train between Faversham and Victoria. 

Commuting and knitting. It can be done, but it requires dedication to preparation, meaning you have to be organised at 6:00am in the morning.

So what have I been doing? Reading, mainly. Because that's what one does on a train. Preferably with headphones, so you don't have to witness the human misery around you. Somewhere between Faversham and Victoria I came across some interesting knitting - related trivia...it involves men, knitting and the island of Jersey (Channel Islands):

Men (as I keep telling non - knitters: knitting was the domain of our male brethren before mere females were allowed to engage in it) are apparently prohibited to knit during the fishing season on the Island of Jersey. By law. To this day.


Thursday 17 May 2012

Design Digest: Ammonite - Part 2

... in which, amongst other things, she talks about sock yarn, choosing a knitting project to suit your mood and the skill level required to knit an Ammonite.


When approaching a design, simplicity is sometimes best. I suppose this is the essence of my previous post on designing Ammonite. Once I had accepted this simple, yet fundamental rule, the design process assumed its own momentum. However, as already mentioned in Part I of my design digest, the first knitted sample turned out to resemble an Elizabethan collar rather than a generously sized, ruffled shawl.

Ammonite: First Test - Knit


This was clearly down to my choice of yarn and a kfb - increase bonanza. Repeated attempts of ironing these faults out with the help of prolonged and intense blocking, yielded only very limited results and did not really seem to make much of an impact overall. It soon dawned on me that I needed to have a rethink on my choice of yarn and moderate my use of increases.

In the first instance I had a look at my stash, which was lacking sock yarn at the time. I briefly contemplated knitting a second Ammonite in Patons UK Misty, but decided against it in the end. I felt that cobweb - type mohair yarn would not give sufficient expression to the ribbed texture of the stitch motif. The answer, obviously, was to use sock yarn and so I went yarn shopping. Joy! (No, this time I really had to...;-) Of course, I had seen some very enticing sock yarns (100g @ £15.00) and even though these looked tempting, I decided to settle on a less costly alternative for two reasons:

Firstly, my pattern required a fair quantity of yarn, approximately 300g to be precise. And secondly, I did not want to overspend on materials, not knowing whether my pattern would actually be right for the materials chosen.

Mietze ... inspecting again

Friday 4 May 2012

Design Digest: Ammonite - Part I


Ammonite and the Grey Cone...

If you are reading this post, I suppose you have seen Ammonite on Ravelry or on Flickr and you might want to know a little more about the design process and my inspiration for the pattern. Perhaps you have merely stumbled upon this blog because you are interested in knitwear design or maybe good, old Google directed you to this page because you are interested in fossils.



If you are looking for fossil - related information (and I don't mean the knitted kind), I have to disappoint you, as I am going to talk about a knitting pattern and, unless you are interested in knitting, what follows will not be a great deal of help to you.

So, Ammonite...It's probably best to start at the beginning. Roughly a year ago I was browsing in a local charity shop and found a cone of grey DK - weight yarn. There was no further information regarding the identity of the yarn, only a label inside the cone stating it was an acrylic / wool mix (30% wool, 70% acrylic). Having done a bit of research, I now believe that the yarn was manufactured by Yeoman Yarns in Yorkshire, an interesting yarn manufacturer, especially for the thrifty knitters amongst us. Yeoman's yarns come wrapped around cones, presumably targeting machine knitters. (And the big advantage of yarn on cones is of course the fact that you won't run out of yarn during your project.)

Mietze inspecting 

As this poor, grey cone was looking a little lonely, I decided to buy it at a bargain price together with two others, one in heather and another in a light creamy brown. The lovely people at the shop must have been glad to see them go and included a pair of knitting needles at the till. 

Here I was with my yarn bargains. I took them home, where they were subjected to the usual "scratch and sniff " inspection by a member of the feline quality control squad. 

Grey Cone and Friends

Tuesday 1 May 2012

The Weekly Swatch, Part 1 - Cartridge Rib Stitch


I have been toying with the idea of creating a swatch / stitch library on the blog for quite some time, but never gotten round to actually doing something about it. As I have more time on my hands at the moment, it appears a good time to get started and commit. I can't guarantee that this will become a weekly thing, but the good intentions are there. (She says.......)

For various reasons, I am currently into simple stich motifs. When designing my own knitted objects, I found that simplicity is a good starting point. From a practical viewpoint, simple motifs make it easy to knit whilst doing something else.


Cartridge Rib Stitch


Saturday 28 April 2012

Ammonite - Free Shawl Knitting Pattern


Ammonite



Ammonite in Knitglobal 4 ply sock yarn




Ammonite is a generously sized, semi – circular, ruffled shawl. The garment is knit from the centre top downwards / outwards, making the size easily adjustable by adding or omitting sections when knitting the body of the shawl. For a shawl measuring the same size as given in this pattern, you will require approximately 290g (just under three hanks) of 4ply Knitglobal sock yarn. The project is also suitable for yarns of different weight. Should you wish to substitute yarn and depending on the effect you are seeking to create, the needle size has to be adjusted accordingly.

A gallery of Ammonites in a variety of yarns is available here.





The body of the shawl features a simple cartridge rib stitch, giving the garment a subtle texture that blends into its semi – circular shape, whilst the top outer edge is worked in garter stitch throughout. Kfb increases are utilised to give the shawl a ruffled look. The bottom outer edge of the shawl is worked in stockinette stitch. This is followed by a playful picot border, adding further drape.

I got the idea for the name when I was in the process of completing the first test knit of the pattern. As I was binding off more and more stitches, the garment slowly started to resemble an Ammonite.

Prototype of Ammonite in generic DK weight yarn




  • Size:
One size – Adjustable by adding or omitting pattern repeats, when working the body of the shawl.

  • Finished Measurements:
Length of straight edge - 1.55m

Height at centre - 0.68m

(Note: Measurements were taken after the shawl was blocked.)

  • Yarn:
Knitglobal 4 ply Sock Yarn - (25% nylon, 75% superwash wool) 437yds / 400m per 100g hank

Colour: Plum

Quantity required: Just under three skeins / app. 290grams

  • Recommended Needle Size:
US#6 / 4mm circular needle

  • Other Materials / Tools:
One darning needle and two stitchmarkers.


  • Gauge:
24 stitches / 30 rows: 4'' in cartridge rib stitch



Cartridge Rib Stitch Detail


Cartridge Rib Stitch:

Row 1 : Knit        Row 7: Knit
Row 2: Purl         Row 8: Purl
Row 3: Knit         Row 9: Knit
Row 4: Knit         Row 10: Knit
Row 5: Purl         Row 11: Purl
Row 6: Knit         Row 12: Knit





Directions:


Shawl Centre

Cast - on 4 stitches, using the provisional (invisible) cast - on.

Rows 1 - 8: Knit


Row 9: Following completion of row 8, do not turn piece. Instead, turn work on right hand needle 90 degrees clockwise. With left - hand needle pick up and knit 4 stitches from the garter knots on the edge of the piece. Once these stitches have been knit, you should have a total of 8 stitches on the right hand needle. Turn piece on right hand needle once again by 90 degrees clockwise. Remove waste yarn from provisional cast – on edge and transfer all stitches to the left hand needle. Knit the 4 remaining stitches. 12 stitches are now on the right hand needle. Continue as follows:


Row 1[RS]: k4, pm, k4, pm, k4

Row 2 [WS]: k4, sm, p4, sm, k4

Row 3: k4, sm, [k1, yo] 3 times, k1, sm, k4. 15 sts

Row 4: k4, sm, p7, sm, k4

Row 5: k4, sm, k7, sm, k4

Row 6: k4, sm, p7, sm, k4

Row 7: k4, sm, kfb in each st to next marker, sm, k4. 22 sts

Row 8: k4, sm, p14, sm, k4

Row 9: k4, sm, k14, sm, k4

Row 10: k4, sm, p14, sm, k4




Shawl Body


  • Note: Whilst the first and last four stitches on every row are knit throughout to produce a garter stitch edge, all stitches between the garter stitch edge are worked in cartridge rib stitch. In the following directions, “working in pattern” means to knit in cartridge rib stitch. Instructions for the cartridge rib stitch are set out above.
  • All increases will take place on row 10 of every section.



1st Section:

Row 1 [RS]: k4, sm, k to next marker, sm, k4
Row 2 [WS]: k4, sm, p to next maker, sm, k4
Row 3: k4, sm, K to next marker, sm, k4
Row 4: k4, sm, k to next marker, sm, k4
Row 5: k4, sm, p to next maker, sm, k4
Row 6: k4, sm, k to next marker, sm, k4
Row 7: k4, sm, k to next marker, sm, k4
Row 8: k4, sm, p to next maker, sm, k4
Row 9: k4, sm, k to next marker, sm, k4
Row 10: k4, sm, kfb in each st to next marker, sm, k4. 36 sts
Row 11: k4, sm, p28, sm, k4
Row 12: k4, sm, k28, sm, k4

2nd Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, kfb in each st to next marker, sm, k4. 64 sts
Row 11: k4, sm, p56 to next marker, sm, k4.
Row 12: k4, sm, k56 to next marker, sm, k4.

3rd Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k2, [k1, kfb] 13 times, [kfb, k1] 13 times to final two stitches before marker, k2, sm, k4. 90 sts
Row 11: k4, sm, p82 to next marker, sm, k4.
Row 12: k4, sm, k82 to next marker, sm, k4.

4th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k2, [k2, kfb] 13 times, [kfb, k2] to final two stitches before marker, k2, sm, k4. 116 sts
Row 11: k4, sm, p108 to next marker, sm, k4.
Row 12: k4, sm, k108 to next marker, sm, k4.

5th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k3, [k2, kfb] 17 times, [kfb, k2] to final three stitches before marker, k3, sm, k4. 150 sts
Row 11: k4, sm, p142 to next marker, sm, k4.
Row 12: k4, sm, k 142 to next marker, sm, k4.


6th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k3, [k3, kfb] 17 times, [kfb, k3] to final 3 stitches before marker, k3, sm, k4. 184 sts
Row 11: k4, sm, p176, sm, k4.
Row 12: k4, sm, k 176 to next marker, sm, k4.


7th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k4, [k3, kfb] 21 times, [kfb, k3] 21 times to final 4 stitches before marker, k4, sm, k4. 226 sts
Row 11: k4, sm, p 218, sm, k4.
Row 12: k4, sm, k 218, sm, k4.

8th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k4, [k4, kfb] 21 times, [kfb, k4] 21 times to final 4 stitches before marker, k4, sm, k4. 268 sts
Row 11: k4, sm, p 260, sm, k4.
Row 12: k4, sm, k 260, sm, k4.

9th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k5, [k4, kfb] 25 times, [kfb, k4] 25 times to final 5 stitches before marker, k5, sm, k4. 318 sts
Row 11: k4, sm, p 310, sm, k4.
Row 12: k4, sm, k310, sm, k4.

10th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k5, [k5, kfb] 25 times, [kfb, k5] 25 times to final 5 stitches before marker, k5, sm, k4. 368 sts.
Row 11: k4, sm, p 360, sm, k4.
Row 12: k4, sm, k 360, sm, k4.

11th Section:

Rows 1 – 9: Work in pattern.
Row 10: k4, sm, k6, [k5, kfb] 29 times, [kfb, k5] 29 times to final 6 stitches before marker, k6, sm, k4. 426 sts
Row 11: k4, sm, p 418, sm, k4.
Row 12: k4, sm, k 418, sm, k4.



12th Section:

Rows 1 - 9: Work in pattern.
Row 10: k4, sm, k6, [k6, kfb] 29 times, [kfb, k6] 29 times to final 6 stitches before marker, k 6, sm, k4. 484 sts
Row 11: k4, sm, p 476, sm, k4.
Row 12: k4, sm, k 476, sm, k4.

13th Section:

Rows 1 - 9: Work in pattern.
Row 10: k4, sm, k7, [k6, kfb) 33 times, [kfb, k6] 33 times to final 7 stitches before marker, k7, sm, k4. 550 sts
Row 11: k4, sm, p 542, sm, k4.
Row 12: k4, sm, k 542, sm, k4.


14th Section:

Rows 1 - 9: Work in pattern.
Row 10: k4, sm, k7, [k7, kfb] 33 times, [kfb, k7] 33 times to final 7 stitches before marker, k7, sm, k4. 616 sts
Row 11: k4, sm, p 600, sm, k4.
Row 12: k4, sm, k 600, sm, k4.



15th Section:

Rows 1 - 9: Work in pattern.
Row 10: k4, sm, k8, [k7, kfb] 37 times, [kfb, k7] 37 times to final 8 stitches before marker, k8, sm, k4. 690 sts
Row 11: k4, sm, p 682, sm, k4.
Row 12: k4, sm, k 682, sm, k4.







Stockinette Edging

Once Row 12 of Section 15 has been completed, continue in stockinette stitch for 13 rows as follows:

Row 1 [WS]: k4, sm, p to next marker, sm, k4.
Row 2 [RS]: k4, sm, k to next marker, sm, k4.
Rows 3 – 13: Continue in pattern (stockinette stitch) as outlined in Row 1 and 2, purling all stitches between the markers on uneven rows and knitting all stitches on even rows.
Row 13 [WS]: k4, sm, p to next marker, sm, k4.

Proceed to bind off.



Picot Bind - Off  Detail



Picot Bind – Off

*Using the cable cast – on, cast - on two stitches. Next, bind off three stitches. Return the single stitch on the right hand needle back on to the left hand needle. Repeat from *. Continue until all remaining stitches have been bound off.


Finishing:

Using a darning needle, weave in ends. Wash the finished garment and block.





List of abbreviations:

co – cast - on
k – knit
kfb – knit in front and back of stitch
p – purl
pm – place marker
sm – slip marker
st – stitch
sts - stitches
yo – yarn over

More information on designing Ammonite is available here.


Should you require pattern support, please feel free to contact me via Ravelry or leave a comment below.

This pattern is for personal use only and may not be reproduced for commercial purposes without permission.



© 2012 Clarice Asquith. All rights reserved. http://makedoandmendnovice.blogspot.com