Showing posts with label Knitting Projects - Easy. Show all posts
Showing posts with label Knitting Projects - Easy. Show all posts

Sunday 21 June 2020

Monster High: Knee Highs

Free Monster High Knee High Stocking Knitting Pattern


After a pair of Monster High doll leggings and tights, it was high time to knit a pair of knee high stockings for the Monsters Highs.

Monster High Doll Knee High Stocking Knitting Pattern
Monster High Doll Knee High Stocking Knitting Pattern


The knee high stockings are knitted seamlessly from the top-down and finished off at the toes with kitchener stitch.

Monster High Doll Knee High Stocking Knitting Pattern
Monster High Doll - Knee High Stocking Knitting Pattern

Saturday 25 April 2020

Free Knitting Pattern: Brocade Lace Choker

As promised, here is my latest free pattern for a knitted lace choker - a project ideally suited for beginner lace knitters looking for a sense of accomplishment in a quick and easy lace project, which can be completed in a day or two. 


Free Lace Choker Knitting Pattern
Brocade Choker - Free Knitting Pattern
The lace motif, which is knitted over eight rows, is simple, consisting mainly of a combination of standard in- and decreases across fifteen stitches. All wrong side rows are a combination of knit and purl stitches. 

Brocade Lace Choker Knitting Pattern - Lace Detail
Brocade Lace Choker Knitting Pattern - Lace Detail

For this project I used just 5g of Scheepjes Maxi Sugar Rush mercerised cotton yarn and 2mm double-pointed needles (dpns). Though it is possible to knit this project on wood or bamboo needles, I recommend the use of pointy, metallic dpns, especially if you are opting for the use of mercerised cotton yarn with this pattern. This will make the knitting experience much more enjoyable. 

The size of the choker can be adjusted easily for different neck circumferences and I recommend you check the fit whilst knitting. Altogether, you should ensure that the body of the choker covers around 80% of the neck before the piece is blocked. The choker is secured with the help of two dainty i-cords, which each measure approximately 20 cm in length. These will be tied to a bow. Beads can be attached to the ends of the i-cords for a more sophisticated finish. 


Free Lace Choker Knitting Pattern
Brocade Lace Choker - I-Cord Detail

The completed piece should be wet-blocked (to open the lace detail) and left to dry over night.

If you decide to substitute the mercerised cotton with another type of yarn, the number of lace repeats will obviously differ. As you can check the fit whilst knitting, this should not be a major issue, making this project ideally suited to using up all types of yarn leftovers, especially sock yarn.



Free Choker Knitting Pattern
Brocade Choker 

Brocade Lace Choker

Free Knitting Pattern




Measurements


Before starting this project, measure your neck circumference. The lace body of your choker should cover around 80% of your neck and it will be secured with two i-cords, which should be long enough to tie a bow comfortably 



The knitting instructions for the Brocade choker below will produce a piece which measures 26.5 cm (body of the choker after blocking) and the i-cords each measure 20 cm in length. For a choker measuring 26.5 cm, you will work 16 repeats of the lace sequence for the body of the choker. One repeat measures approximately 2 cm. Adjust the number of lace repeats for a shorter or longer choker.


Free Choker Knitting Pattern
Brocade Choker Knitting Pattern

Materials and Tools


  • 5g of Scheepjes Maxi Sugar Rush mercerised cotton yarn 
  • 2 mm double-pointed needles
  • 1.5 mm crochet hook / fine darning needle (for sewing-in yarn ends and attaching bead)
  • contrast yarn (for provisional cast-on)
  • 2 beads for securing the ends of the i-cords (optional)
  • Blocking utensils



Free Choker Knitting Pattern
Brocade Choker Knitting Pattern 


Instructions

  • Cast-on 15 stitches, using the provisional cast-on for the three centre stitches (7,8,9) as shown in the photo below. The three live stitches are located, where the i-cord will be worked later.
Provisional Cast-On Choker
Provisional cast-on for i-cord
  • Knit 4 rows (garter stitch)
Start of lace pattern:
  • Row 1 (right side): k2, p2, k2tog, [k1, yo] twice, k1, sl1, k1 psso, p2, k2
  • Row 2 (wrong side): k4, p7, k4
  • Row 3: k2, p2, k2tog, yo, k3, yo, sl1, k1, psso, p2, k2
  • Row 4: k4, p7, k4
  • Row 5: k2, p2, k1, yo, sl1, k1, psso, k1, k2tog, yo, k1, p2, k2
  • Row 6: k4, p7, k4
  • Row 7: k2, p2, k2, yo, sl1, k2tog, psso, yo, k2, p2, k2
  • Row 8: k4, p7, k4
  • For a choker body measuring 26.5 cm repeat the above lace sequence 16 times. Adjust the number of repeats according to your own requirements.
  • Knit 3 rows in garter stitch, ensuring that the cast-off is started on the wrong side.
  • Bind off all stitches up to the three centre stitches, knit the centre three stitches (7, 8, 9) and cast-off the remaining stitches. 

I-cords: 
  • Start knitting a 20 cm i-cord with the three remaining live stitches, bind-off i-cord  and attach bead (optional). 
  • Pick-up the three centre stitches from the provisional cast-on edge, attach yarn and proceed to knit the  second i-cord. Ensure the i-cords are long enough to comfortably tie a bow.

Icord  Detail  - Knitted Lace Choker - Free Knitting Pattern
Brocade Choker - I-Cord Detail


Finishing:
  • Weave-in all yarn ends and block piece to ensure the lace is opened up.  



Should you require pattern support, please feel free to contact me via Ravelry, Twitter, Facebook, by e-mail or leave a comment below.

This pattern is for personal use only and may not be reproduced for commercial purposes without permission. Neither may you sell any items made from the directions in this pattern.

Should you wish to knit another choker (and, let's face it, one can never have enough chokers), the pattern for my Nameless Choker (pictured below) is available here and the pattern for the Cascade Choker (last image in this post) is available here.

Nameless Choker
Lace Choker Knitting
Cascade Lace Choker






© 2020 Clarice Asquith. All rights reserved. http://makedoandmendnovice.blogspot.com





Friday 27 December 2019

Big Jim Action Figures - Free Pants Knitting Pattern

Boxer Shorts for Big Jim Action Figures


Having crafted a lot for my collection of Monster High fashion dolls lately (more here), I decided it was time to branch out and design some pants / boxer shorts for Winnetou, a Big Jim Action figure and by far the oldest doll in my collection.

Big Jim Action Figure (Winnetou / Geronimo) by Mattel ca 1970s / 1980s
Big Jim Action Figure (Winnetou / Geronimo) by Mattel ca 1970s / 1980s


With boys being the obvious target market, Big Jim action figures were produced by Mattel during the 1970s up to the mid-1980s, when production of the line eventually seized. As you can see from the picture above, the dolls don't have a proper head, yet come with a variety of other features, including a bulging biceps and the legendary push button in their backs, enabling the characters to execute what is supposed to resemble 'a karate chop move'. For a demonstration, watch the video below.





Though I don't have any concrete proof, I assume that my figure is named Winnetou, the Native American chief, originally marketed as part of the German 'Karl May' movie edition of the toys. These were distributed in other countries as part of the regular Big Jim / Kid Acero line with a  generic wild west theme and Winnetou being renamed Geronimo. 

Unlike most of the other Big Jim figures, Winnetou was one of the few characters, who sported a head full of hair, which, given the age of the toy, is still in perfect condition.

At any rate, having recently designed a basic leggings pattern for the Monster Highs, I adapted the pattern for Big Jim action figures and knitted Winnetou (and friends) a few pairs of boxer shorts. Winnetou seems pleased and my boxer short pattern can be found below.


Big Jim Action Figure (Mattel)
Big Jim Action figure (by Mattel) in hand knitted boxer shorts (by me)
Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts
Big Jim Action figure (by Mattel) in hand knitted boxer shorts (by me) 


Free Big Jim Action Figure Boxer Shorts Knitting Pattern


Knitted seamlessly from the waist down, this pattern gives you the chance to check whilst knitting to ensure a snug fit; and the length of the boxer shorts  can obviously be adjusted as you go. 


Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Knitted on 2.5mm to 3mm needles, the pattern is suitable for all types of sock yarn. For  the  boxer shorts in the images, I used Madelinetosh Tosh Merino Light (Victorian Gothic - for the dark purple pants) and Araucania Botany Lace for the pink and multi-coloured versions.


Materials and Tools

  • app 5 - 10g of: 4 ply Sock Yarn 
  • 2 - 3mm Double-Pointed Needles 
  • 4 Stitch Markers
  • Scissors
  • Safety Pin x2 or Scrap Yarn (in contrasting colour)
  • Darning Needle, Sewing Needle or Crochet Hook (for sewing in ends)

Big Jim Action figure Winnetou (by Mattel)
Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Instructions

Cast on 30 stitches.

Row 1: k1, p1 to end of row.

Row 2 - 5: Divide stitches evenly on 3 double-pointed needles and join in the round, placing a stitch marker at the beginning of the round. Continue in k1, p1 ribbing for another 4 rounds.

Waist Increases: 

Row 6: SM (slip marker), k1, PM (place marker), kfb, k11, kfb, pm, k1, pm, kfb, k to last stitch, kfb (34 stitches)

Row 7 - 11: Repeat above increase row five times in stockinette stitch, knitting in the front and back of each stitch directly before and after each marker until the stitch count totals 54 stitches.


Dividing for the legs

Removing markers, at the beginning of the next round place the first 27 stitches onto waste yarn. 

Join the remainder of the stitches in the round, placing a marker at the beginning of the new round.

Row 12: sm, kfb, knit to last stitch, kfb (29 stitches)

Continue knitting in stockinette stitch for 11 rounds and bind-off or continue knitting until piece has reached the desired length.

Proceed to knit the second leg, dividing stitches held on scrap yarn evenly on three double-pointed needles. Using the m1 increase method, pick up 1 stitch at the beginning and at the end of the round to ensure a closed up seam. Mark the beginning of the round and start knitting the second leg, following the instructions above. 

Weave in all ends, block and enjoy!

For my other doll knitting patterns, please visit this link.


Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts
Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts


Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts
Big Jim Action figure Winnetou (by Mattel) wearing handknitted boxer shorts

Big Jim Action figure Winnetou (by Mattel) and his haul of hand-knitted boxer shorts

Should you require pattern support, please feel free to contact me via Ravelry, Twitter, by e-mail or leave a comment below.

This pattern is for personal use only and may not be reproduced for commercial purposes without permission. Neither may you sell any items made from the directions in this pattern.







© 2019 Clarice Asquith. All rights reserved. http://makedoandmendnovice.blogspot.com

Saturday 14 December 2019

Free Pattern: Knitted Leggings for Monster High Dolls

Free Monster High Leggings Pattern 

The Monsters were in need of some new clothes, and I decided it was time to make a few knitted leggings / pants.

This pattern is for  Monster High dolls, measuring approximately 26cm in height. Knitted seamlessly from the waist down, it gives you the chance to check whilst knitting to ensure a snug fit; and the length of the leggings can obviously be adjusted as you go. 


Monster High Doll Free Knit Leggings Pattern
Monster High Doll Free Knit Leggings Pattern


Knitted on 2.5mm to 3mm needles, the pattern is suitable for all types of sock yarn. For the leggings below, I used Madelinetosh Tosh Merino Light (Victorian Gothic) and Araucania Botany Lace. 

Monster High Doll Free Knit Leggings Pattern
Monster High Doll Free Knit Leggings Pattern

As you can see in the images, two of the Monsters are wearing a light green, fluffy jumper and OOAK wigs made from brushed acrylic yarn. The pattern for the jumper is available here, and instructions on how I make my doll yarn wigs can be found here and here. All of my other Monster High projects are available via this link.

Monster High Doll Free Knit Leggings Pattern
Monster High Doll Free Knit Leggings Pattern



Without further ado, here is my knitting pattern for the knitted leggings: 


Monster High Doll Leggings

Pattern Notes


Materials and Tools

  • app 5 - 10g of: 4 ply Sock Yarn 
  • 2 - 3mm Double-Pointed Needles 
  • 4 Stitch Markers
  • Scissors
  • Safety Pin x2 or Scrap Yarn (in contrasting colour)
  • Darning Needle, Sewing Needle or Crochet Hook (for sewing in ends)


Thursday 12 December 2019

Knitted Leggings for Monster High Dolls - Preview of New Pattern



Monster High Knitted Leggings
Monster High Knitted Leggings


New Free Monster High Knitting Pattern Preview

I have been busy knitting leggings for the Monster Highs dolls. The leggings are knitted seamlessly from the top down and the size can be adapted whilst knitting, ensuring a snug fit. I'm hoping to release the free pattern on the blog in the next few days. 

Until then, here is a little preview.

Monday 12 November 2018

Monster High Knitted I-Cord Dress Pattern - Sneak Peek of the new Pattern

-Update: The Monster High I-Cord Dress Pattern is now up on the blog and available here.-


Following on from knitting a small pencil dress for a Takara Dollcena / Petite Blythe and Little Pullip doll (photos below) a few months ago, I have adapted my pattern to fit a Monster High doll.   


Knitting Pattern for Takara Petite Blythe / Dollcena Doll
Knitted Mini Pencil Dress for Takara Petite Blythe / Dollcena Doll

The pattern for the knitted I-Cord dress for Petite Blythes (above) is available here.

My knitting pattern for the Monster High dress (below) will be on the blog soon. In the mean time, I couldn't resist releasing a sneak peek of the new Monster High dress.

Monster High Doll Knitting Patern
I-Cord Dress Knitting Pattern for Monster High Doll

Friday 15 December 2017

Knitting for Dollcena Takara Tomy Dolls


After knitting a pencil dress with sock yarn for this Takara Dollcena doll, I decided to make another in black (also with sock yarn). Project instructions will follow. Soon. I hope.

Here's the prototype.

Pencil Dress for Takara Tomy Dollcena Doll, hand-knit with Araucania Botany Lace 


And here's a preview of the little black pencil dress: 

Dollcena Takara Tomy doll in hand-knit pencil dress

Dollcena Takara Tomy doll in hand-knit pencil dress

Dollcena Takara Tomy Doll in Handknit Pencil Dress (Sock Yarn) - Beaded I-cord Halter 

Dollcena Takara Tomy Doll in Handknit Pencil Dress (Sock Yarn) - Beaded I-cord Halter


Thursday 5 October 2017

Knitting for Dollcena Dolls

... can be tedious. It's not so much the knitting, rather the finishing, which can be extremely time-consuming. 

But this Dollcena urgently needed a comfy outfit. 


Takara Tomy Doruchena / Dollcena Doll (Lilo) - handknit dressing gown




Takara Tomy, Doruchena / Dollcena Doll (Lilo) - handknitted gown

I am currently working on pattern notes for a hand-knit tiny pencil dress for this Dollcena. Progress pictures are below, more is available here.

Handknit Pencil Dress (sock yarn) for Takara Tomy Dollcena - I-cord halter detail



Sunday 6 September 2015

Unravelling Old Projects: Musings on Reckless Beginner Knitting and Body Image

In the interest of frugality, I will be unravelling a project from the very early stages of my 'knitting career'. This was a time when knitting a gauge swatch was such a bore, adequate measuring (of myself and the swatch) appeared mysterious and incredibly complicated, blocking didn't exist and, due to a lack of familiarity with materials, I habitually chose the most unsuitable yarns for my projects. 

Hopelessly Oversized Asymmetrical Cardigan (completed circa 2010 / 2011)

I'm sure many other beginner knitters will be familiar with this cavalier attitude: You feel excited by the very fact that you mastered the basics of knitting and you just want to get on with it. Every project therefore turns into a test, attempting new techniques and more challenging pieces, rather than paying attention to the necessary groundwork, i.e. jumping through the hoops of all the preparatory steps before casting-on in earnest.  


I adopted this rather nonchalant attitude in two of my earliest projects: a jumper and an asymmetrical cardigan. And even though every seasoned knitter drew my attention to the importance of gauge, selecting suitable materials or the necessity of blocking, I chose to ignore all of this well-intentioned advice, knowing in the back of my mind that I was en route to Disappointment Central.


Friday 4 September 2015

Exploring Basic Shapes: The Knitted Star

An end to a thoroughly unproductive day, in which I merely managed to complete the pattern notes for a basic knitted star in preparation for another upcoming project, which - going by the speed it's taken to complete these notes - will take a little while yet. 

Without further ado, here are the instructions for a basic star, which is worked in the round on double-pointed needles. The star's outer edges are shaped with short rows. The size of the star can be modified by increasing or reducing the total number of stitches before working the spikes on the outer perimeter.

Knitted Star
Materials Required
  • 4 double-pointed needles (dpns)
  • Approximately 10 - 30 grams of yarn (matching the needle size of the dpns) 
  • Scissors 
  • Darning Needle

Set - Up
  • Cast-on 7 stitches in whichever method you are most comfortable with (using a dpn)
  • As if knitting an I - Cord, bring the yarn to the first cast-on stitch
  • K1, KFB, K3, KFB, K1 [ 9 stitches in total]
  • Divide these 9 stitches evenly on three dpns and join in the round
Knitted Star after completion of first increase row 

Body of Star

Row 1: K9 
Row 2: KFB into all stitches [18 stitches]
Row 3: K 18
Row 4: *KFB, K2; repeat from * to end [24 stitches]
Row 5: K24
Row 6 *KFB, K3; repeat from * to end [30 stitches]
Row 7: K30
Row 8*KFB, K4; repeat from * to end [36 stitches]
Row 9: K36
Row 10*KFB, K5; repeat from * to end [42 stitches]
Row 11: K42

Please note: For a larger or smaller star, you can continue to increase the stitch count (adding 6 stitches on every even row) or decide to start the shaping of the spikes before you reach 42 stitches. Instead of utilising KFB increases, it is also possible to increase the stitch count with 'yarn overs'. This will result in a lace star.


Knitted Star - Detail

Before you start shaping the points, you should ensure that each dpn holds an even number of stitches. Half of the stitches on every needle will be shaped into one of the six outer points.


Shaping of the Outer Points


Shaping the Outer Points

Row 1: K7, turn (do not wrap the stitch when turning!)
Row 2: P7
Row 3: Sl1, K1, PSSO, K3, K2Tog, turn
Row 4: P5
Row 6: Sl1, K1, PSSO, K1, K2Tog, turn
Row 7: P3
Row 8: Sl1, K1, K1
Row 9: P2tog
Row 10: Bind-off remaining, break yarn

Proceed to shape the remaining five outer points in the same fashion.

A star is born.


Knitted Star


For pattern support, please feel free to contact me via Ravelry (ClariceAsquith), Twitter (@Slipstitched), Instagram (@clarice.asquith) leave a comment below or by e-mail: clarice.asquith@googlemail.com.


For a link collection to all original designs on the blog, please visit this link.

This pattern is for personal use only and may not be reproduced for commercial purposes without permission.

© 2015 Clarice Asquith. All rights reserved. http://makedoandmendnovice.blogspot.com